• Guest The new Content Management System (CMS) is live. Without further ado... Login Here

MIDI controller setup

Ashley C

Member
Joined
Mar 29, 2016
Location
U.K.
Hello All,

Could anyone advise if it's possible to set up a midi controller in this way.

I currently have a Alesis VI49 it has 12 knobs at the top which I have mapped, first set of 6 controls tracks 1-6 volume & and second set of 6 controls tracks one 1-6 pan.

What I'm after is a way of shifting banks set so I can map volume and pan for tracks 7 - 12 and so on.

I'm using reaper if it's something DAW specific. Any help would be much appreciated.

Go easy I'm new to midi
 

pcrecord

Quality recording seeker !
Well-Known Member
Joined
Feb 21, 2013
Location
Quebec, Canada
Most DAWs have binding fonctionnalities that let us assign a midi note/control to a fonction of the software.
What you are asking is if the Alesis VI49 has different pages of assignement for the control buttons.
As the manual goes, it doesn't seem to offer this fonctionnality. But check in the VI Editor software if you can assign values to different layers.

What you could do is to assign them all to volumes or gain or pan, depending on what you are using the most.
 

Ashley C

Member
Joined
Mar 29, 2016
Location
U.K.
Thank you!!, yes the VI editor has different presets to configure so Preset 02 gives me 12 new values to map to other tracks.

(The possibilities are endless (y))
 
Top