C
ceaserin2
Guest
On another posting, Opus..You said the following:
Clean format and a complete reinstall (several) -same error code
Changing Pci slots -same error code
Assigning different IRQ's manually in the bios to diffent PCI slots. -same thing
All Windows updates and/or latest service packs, all latest driver updates (chipset and otherwise) -Same dang thing...
Tried it with nothing else but a graphics card (ALLusb, serials, and parallel port as well as onboard sound disabled in the bios.) -Still same thang...
Every conceivable windows tweak as well a non-tweaked windows. Still same-dang thang..
Yes, I'm installing it correctly (according to Motu's procedures)
Yes, I'm using an Intel chipset (Motu recommended)
No, The card does not share an IRQ, it is always on its own. Especially when I install it with nothing else but a graphics card.
Yes, ACPI is disabled.
So I guess I'm just fresh out of ideas. Any thing I've left out? Or should I just conclude that when it comes to pc,MOTU CAN'T CODE THEIR WAY OUT OF A WET-PAPER SACK!
Ok, Any ideas why the new Motu drivers will not work in either WinXpPro, or Win2000Pro? The wave driver gives a "Code10" error "Device Cannot Start". I know of several people who have been having this same problem and a solution has yet to be found. I've had the same thing on two different chipsets (both Intel and Amd), with two different graphics cards on both operating systems. Other things I have tried include but are not limited to:Please feel free to ask me any questions as I had worked on several MOTU products and actually found a lot of fixes for most of their gear.
Clean format and a complete reinstall (several) -same error code
Changing Pci slots -same error code
Assigning different IRQ's manually in the bios to diffent PCI slots. -same thing
All Windows updates and/or latest service packs, all latest driver updates (chipset and otherwise) -Same dang thing...
Tried it with nothing else but a graphics card (ALLusb, serials, and parallel port as well as onboard sound disabled in the bios.) -Still same thang...
Every conceivable windows tweak as well a non-tweaked windows. Still same-dang thang..
Yes, I'm installing it correctly (according to Motu's procedures)
Yes, I'm using an Intel chipset (Motu recommended)
No, The card does not share an IRQ, it is always on its own. Especially when I install it with nothing else but a graphics card.
Yes, ACPI is disabled.
So I guess I'm just fresh out of ideas. Any thing I've left out? Or should I just conclude that when it comes to pc,MOTU CAN'T CODE THEIR WAY OUT OF A WET-PAPER SACK!