Selecting a good patchbay

dabmeister music

Well-Known Member
Joined
Jan 11, 2003
Location
Woodbridge, Va
The way I see things is , if quality can be determinded through your wiring/cables , then should'nt this pertain to patchbays? I'm looking for a good patchbay. Then again , a couple of good patchbays. Does anyone know of or can give a good recomindation as to what's widely use now-a-days? The only one I can recall is "Neutrik".
 
Joined
Mar 4, 2001
Well, there is Mosses & Mitchell at $500 and up a pop... Too much for my blood when in need of more than 2-4. ADC is a good choice, but after dealing with them in trying to buy a cable support bar for one of their curently manufactured patchbays that they wouldn't sell me by itself, I settled on Switchcraft.
 

AudioGaff

Well-Known Member
Joined
Feb 23, 2001
Location
Silicon Valley
Patchbay for what? 1/4" TS or TRS, TT, XLR, MIDI

For 1/4" TS or TRS in the affordable range, they all seemed to be about the same to me. I went with the dbx for home use as I got four new ones in trade for some work I did a few years ago. So far they are holding up ok.
 
Top