TL Audio EQ-2 for mastering?

S

sister

Guest
I have chance to buy one for about 1300 euros. What do you think about this EQ for mastering purpose anyway.
 
W

wave

Guest
I had this unit on demo for a week. I found it very harsh in the top and muddy in the low end. It was very difficult to match channels and found the cut and boost a bit all or nothing.Definitley not what I would call a mastering eq.
 
S

ssltech

Guest
TL audio is basically a Tony Larking production.

Tony Larking's been making cheap gear for years. -It's been budget stuff. -If not him then it seems to be made for him, examples are the Bel Flanger, the Bel BD80 delay line and so on. The Larking family (Don Larking was a used equipment dealer who used to market the Bel stuff heavily) have never really been into super-high quality stuff.

I think that all of the TL stuff is over-rated, over-priced and (unfortunately now) over-here!

Keith
 

Jon Best

Well-Known Member
Joined
Mar 18, 2001
nononono.

:)

Spend a couple hundred on a Urei 546, or buy a couple of Speck ASC's, and you'll be a lot farther along. For a lot less money.

Originally posted by sister:
I have chance to buy one for about 1300 euros. What do you think about this EQ for mastering purpose anyway.
 

Doug Milton

Well-Known Member
Joined
Sep 23, 2002
Jon,
I have a 546 that I had the power supply re-capped, barrier stripes disconnected and all internal wire replaced with Kimber. I do not use it in my mastering set up. Can you give me an idea of what would be a fair price if I try to sell it?

thanx
 

Jon Best

Well-Known Member
Joined
Mar 18, 2001
Responded to your PM before I read the post...

This is a pretty good chance for someone to get into a better-than-Finalizer EQ. Certainly a step up from the TL stuff. $250 to http://www.audioupgrades.com should make it even that much better.

Originally posted by Doug Milton:
Jon,
I have a 546 that I had the power supply re-capped, barrier stripes disconnected and all internal wire replaced with Kimber. I do not use it in my mastering set up. Can you give me an idea of what would be a fair price if I try to sell it?

thanx
 
Top