Reply to thread

Message: [QUOTE="Kurt Foster, post: 4032, member: 7836"] Brett, I haven't used the MOTU 828 before but it should have line inputs. If you are going from the line outs on the mixer into mic pres on the MOTU that is where your problem lies. Preamping the signal twice will induce a lot of noise. If you are not using multiple mics and channels on the mixer, try going straight into the MOTU. That should be a better pre than the ALESIS. If you are using several mics you will need the ALESIS to sub mix them. You should take the outputs of the mixer into line inputs on the MOTU.. Happy Tracking, Fats ------------------------------------------------------------------------ Tannoy, Dynaudio, Blue Sky, JBL, Earthworks, Westlake, NS 10's :D , Genelec, Hafler, KRK, and PMC Those are good. …………………….. Pick one. ------------------------------------------------------------------------ [/QUOTE]