The Panasonic SV-3800 has coax digital out, optical Out, AES XLR out and balanced analog XLR left and right outputs. We currently are able to use the analog outputs and bring them into our Soundcraft Ui24R.
I think the results are good using but have been asked to investigate using the AES or Optical. I can purchase an Edirol UA-25EX on ebay for $60 that I believe will work with the SV-3800.
Has anyone here done digital transfers of DAT tapes to PC? If so, I'm interested in how you did it.
Electrically, the Edirol UA25EX should work when using an optical cable, as would almost any other interface that can input S/PDIF data on optical or on coax (with a converter). However, I think th
Thanks for the heads up on the Fireface, RME makes the best audio interfaces - will take a look on ebay. We have a 1394 port on the PC. There is a UA25EX driver for Windows 10 on it's Roland support page. We might take a chance on it. Last night we did some analog to digital transfers. They won't be used for further production or copyright etc so I think he's going to just go that route.
Electrically, the Edirol…
Electrically, the Edirol UA25EX should work when using an optical cable, as would almost any other interface that can input S/PDIF data on optical or on coax (with a converter). However, I think that with these older interfaces you are in danger of hitting driver problems when trying to run with Windows 10 or 11.
I've done many DAT tape transfers and never had problems, but then I was using my RME FireFace 400, for which RME has been excellent in keeping the drivers updated. You might want to see if you can find a second-hand RME box (e.g. UCX) that would give you a greater chance of it working without problems.