Skip to main content

Tracking vocals today. RODE K2Tube condenser mic. In the middle of a lyric, the mic preamptty much stopped working. Still had a signal but was about one tenth of the volume it should have been at. The singer for some reason pulled the pop-stopper off of the mic right before it crapped out. Checked the tube and it appeared to be fine. Would spit hitting the diaphram cause a short or something? Maybe the cable was jarred...would this cause the problem. It uses a 7 prong female thingy so I didn't have another cable to try. Any suggestions? Any help would be much apprieciated! Thanx! -matty
sushifish.org

Comments

anonymous Sun, 12/02/2007 - 09:13

I agree sounds like a tube went..
Those cheap chinese tube they put in there are not prone to long life...If Im right those are 6072 tubes

I got some nice Military Phillips 6072's off of ebay
that had much better detail and warmer sounding..

So look for some NOS or used non -Chinese 6072's
they will last longer and sound better..