https://www.dropbox.com/s/h3cpd16f4lnnfjz/TheCussin%27Man-03JAN2018.wav?dl=0
Hi there!
This song is a social protest song about the excessive use of profanity in our culture and the degradation of the English langauge. I assure you there are no actual cuss words in the recording, just lots of bleeps.
That being said, this is definitely NOT safe for work! And probably children either.
Please critique my mix. I'm going for a modern sound, with a lot of loudness, and a "punk rock" style to it.
Thanks so much, and great to be back here again!
-Johntodd
Comments
Here we are! Thanks for the help on the upload thing. I was lo
Here we are! Thanks for the help on the upload thing. I was looking all over everywhere else but here. :)
The Cussin' Man:
[MEDIA=audio]https://recording.o…
pcrecord, post: 455041, member: 46460 wrote: John the song has a
pcrecord, post: 455041, member: 46460 wrote: John the song has a good vibe but the sound just hurt my ears.
You have some agressive high-mids there that are not pleasant. Also, there seems to have a timming gap at the end of the drum fills were you using sample loops ?
I'll check on that timing gap. That was on purpose to provide "feel", but may be more "felt up" than it should be. ;)
As for the high-mids, that's one thing that concerned me. I wondered about it because it sounds great in here when I push the volume; meaning; I wonder if my speakers are accurate enough for me to get this close to the edge. Now I know.
Thanks PC!
-John
JohnTodd, post: 455044, member: 39208 wrote: I'll check on that
JohnTodd, post: 455044, member: 39208 wrote: I'll check on that timing gap. That was on purpose to provide "feel", but may be more "felt up" than it should be. ;)
I don't mind a gap it it stays on time... You know when taping your feet to the beat and certainly something is off... ;)
JohnTodd, post: 455044, member: 39208 wrote: I wonder if my speakers are accurate enough for me to get this close to the edge.
If you are monitoring at high levels, your ears will get tired quick and won't hear those frequencies well.
I get comfortable to mix at around 50db but I bump it up and down periodically to get better perspectives.
Of course your mix may have nothing wrong to go to the mastering phase (on which the ME will rectify any freq bumps)
OK, I've taken the suggestions to heart. Here is the new versio
OK, I've taken the suggestions to heart. Here is the new version.
Many thanks, and please keep the critque coming.
-Johntodd
[MEDIA=audio]https://recording.o…
Hey John if you are comfortable uploading your track to our serv
Hey John if you are comfortable uploading your track to our server so we can stream it here, that would sure be cool. Keep in mind you need to mp3 it.