Skip to main content

ProTools question

Member for

17 years 6 months
Okay - so I have a fairly simple question for some of you who would probably slap me for asking such a dumb question...but I don't use PT, so I don't know the answer.

I have client who wants several tracks mixed. They were recorded on PT HD3 and I use Sequoia.

Could I get PTLE with something like the MBox and then bounce the tracks out so that they're all equal length (fill in gaps with zeros) and then export to just a straight up wave format that I can then import into Sequoia and mix?

Does anyone know of any (inexpensive or free) other work arounds??

With the files I just downloaded, I'm looking at over 250 tracks of material - none of which is the same length and I'd have to spend HOURS lining it up properly.

Thanks!

Jeremy

Comments

Member for

21 years

Member Mon, 11/19/2007 - 14:42
Sorry if this is a late reply but to the easiest way to get those files (as was already mentioned, but I'll elaborate) is this:

Have the client "save copy in", and tell him to set it so that all audio files are copied to the new backup project folder, as well.

Now they should open up the new project and select all the audio tracks and drag/highlight from the end of the session to the beggining and consolidate the tracks.

once consolidated, they should look in the region list and select clear all ->unused... and select delete from disk option.

This will remove all the edited regions and extra audio files and leave you with only the used audio files, which are all consolidated to the start of the session.

When you look in the session folder, you'll find only the tracks you need and no extra stuff. works for me, whenever i need to transfer to another recording system.

Member for

13 years 10 months

bent Sat, 11/03/2007 - 21:26
I'm not sure of the PTLE compatability with HD3 sessions (looking on the M-Audio website, it appears that PT M-Powered 7.1 is compatible), but you certainly can bounce the tracks to any length you desire.

All you have to do is take the cursor shaped edit tool and drag it from the beginning of the region to the end, mute the tracks you do not want bounced, and PT will bounce only the area of the shaded region that you selected, and only the tracks that are active.

It will take a while, though - especially with 250 files.

For free or inexpensive workarounds, I cant really think of any other software that will open PT session files. Mac PT has a hard time opening up Windows PT sessions as it is, and vice versa, if they weren't saved with "Enforce Mac / PC Compatability" selected.

With all of the great things I've heard about Sequoia I'm kinda surprised that it won't open them.


I'll be grateful if anyone has a workaround for this head scratcher myself!

Member for

15 years 7 months

TVPostSound Sat, 11/03/2007 - 21:42
I'm not sure of the PTLE compatability with HD3 sessions, but you certainly can bounce the tracks to any length you desire.
All you have to do is take the cursor shaped edit tool and drag it from the beginning of the region to the end, mute the tracks you do not want bounced, and PT will bounce only the area of the shaded region that you selected, and only the tracks that are active.
It will take a while, though - especially with 250 files.

People please stop depending on the bounce function.

bent, what you are suggesting is a time consuming (wasting) process, it wont even address his needs, there are many more ways to skin a cat in Pro Tools.

Member for

13 years 10 months

bent Sat, 11/03/2007 - 21:43
I just found this useful tidbit:

Sessions created and saved as Pro Tools 7 sessions are always compatible on both Windows and Macintosh systems.

“Enforce Mac/PC Compatibility” is no longer necessary with the .ptf format that was introduced in Pro Tools 7. These files transfer back and forth between PC and Mac with no problems.

Member for

15 years 7 months

TVPostSound Sat, 11/03/2007 - 22:05
Highlight the earliest region in time on whichever track it is, shift click the last region in time on whichever track. Shift P, shift colon until all the tracks are highlighted, it will include blank space at the head and tail of tracks where regions start later, and end earlier.

Consolidate all tracks, it will create whole files that all start and end at the same time, then export to what sample, bit. etc he needs, if not already what he wants. Fades will be consolidated in the process. Spaces will be zeroed.


Bouncing in Pro Tools is not a good thing.

Member for

13 years 10 months

bent Sat, 11/03/2007 - 22:10
I assumed that he would turn off automation and plugins.

Consolidate all tracks, it will create whole files that all start and end at the same time

I also assumed that consolidating regions, regardless of your selection, would ignore the empty space at the head and tail...

You know what assume makes, OK it makes an assoutofme...

Member for

15 years 5 months

BobRogers Sun, 11/04/2007 - 05:34
I should be better about consolidating tracks and discarding the dribs and drabs of my PT editing sessions. My guess is that Jeremy's 250 files will consolidate down to a very small number of essential tracks.

TV - what is the difference between the consolidate and export and using the bounce to disk functions in PT? Do you avoid using the bounce function completely?

Member for

17 years 6 months

Cucco Sun, 11/04/2007 - 07:47
Thanks TV! I will take you up on your offer once I can move the files from my audio pc to a memory stick and then via e-mail.

Ultimately, I'm assuming I will wind up with far fewer essential tracks. I just did another track for this gentleman and it was 66 tracks - all equal length. However, many of the tracks were labelled "L" and "R" and it turns out that the recording engineer recorded mono source to a stereo track and thus gave me several too many tracks.

I'm wondering if maybe the tracks that are all the equal length would be the tracks I need to focus on and the rest of the tracks (fragments) are "discard" material...bad vocal takes, etc.

Thoughts??

Member for

15 years 7 months

TVPostSound Sun, 11/04/2007 - 07:51
Consolidate's original purpose was to make a continuous file from a recording with multiple "punches".
When recording lets say one track of guitar, the first recording is a file, if you punch in a new solo, you now end up with 2 regions, start, and end, and a file for the solo. if you create fades for the solo in and out, you now have 3 regions, and 2 fades.
Regions are "virtual" files. Consolidation creates one continuous file from the above. Once you have "cleaned up" your tracks, you can then used the "deleted unused regions" function to clean up your regions bin so its not so big.
Since regions are virtual, and if you did a "save as" your saved session can remain a mess, but your session is tidied up!!

I personally never bounce, I used consolidate to do the above, or bus and record to track, if I need to process automation, and plugins. Since I deliver 48K 16bit to video editors for layback, my sessions start at 48K 16bit, so export is not even used.

Tags

x