Skip to main content

Removing plosives in a mix

Member for

21 years 2 months
Hi all. I was wondering something about plosives. I've got a couple of them at the beginning of a song and they're fairly minor and weak so I think I'm going to try to compress them or EQ them out - but out of curiousity, can anyone tell me if mastering will be able to help. I've heard that they're sometimes better handled by a good mastering engineer. Any comments?

Comments

Member for

18 years 6 months

sheet Tue, 08/05/2003 - 04:03
IMO, there could be some artifact of the plosive, because you have moved the diaphram with air. That movement and distortion of the diaphram surface has effected the higher frequencies as well.

If it is subtle, try compression, then experiment with a high-pass first. EQ for me is a last resort.

They might be able to to it with more finese and precision. Then again, they may not. I would get a consultation with your mastering guy. Maybe send him a disc or e-mail an MP3 (gag).

Good luck.

Member for

19 years 8 months

sdevino Tue, 08/05/2003 - 13:27
If you wait for mastering, then whatever the mastering engineer does will effect all the music content close to the frequencies of your plosives.

A good quality EQ with a high pass should improve thing alot . There is little if any vocal content below 100 Hz so if you are careful it should be easy to fix. But you need a good EQ.

Steve

Tags

x