Skip to main content
Start a topic JOIN NOW!

m-audio Blackbox

Member for

21 years
Hi ;

Can I use m-audio black box for amateur home recording or Do I have to buy another sound card for the latency ?

Comments

Member for

21 years

Member Wed, 09/03/2008 - 05:48
Thank you very much for your reply Tony And sorry for submitting similar posts twice . Just couldnt decide if the both questions can be asked in this section . Anyway just to learn further how could you understand that the device has a low latency . Is there a variable in the feature list or did you used this item ? What values are suitable ?

Member for

13 years 9 months

StephenMC Wed, 09/03/2008 - 07:45
Regardless, is latency much of an issue in software monitoring?

I've only done ten tracks with basic processing (EQ, compression, reverb, pitch/beat correction), but it's never caused latency issues (unless those issues were auto-corrected by the software?) and I generally use software monitoring.

Member for

15 years 10 months

hueseph Wed, 09/03/2008 - 08:02
StephenMC wrote: Regardless, is latency much of an issue in software monitoring?

Yes, latency is an issue with software monitoring if you have poor ASIO drivers or if your computer is particularly slow.

I have a Black Box but I only use it for the amp sims which are.....not bad. The Black Box is limited to 16bit 48kHz though which may not be an issue now but you may end up finding yourself growing out of it in the future. Ah yes, the endless pursuit or cleaner sound. It does support ProTools M-Powered which is nice but that will set you back another $400 give or take. Comes with Abelton Live Lite and some loops but it's limited to 4 audio tracks. OK for a start but again, you may find yourself growing beyond it. I don't know how the ASIO drivers are as I run it into my Onyx then into Cubase or Tracktion 3. It's an M-Audio product though, they do one thing well and that is ASIO drivers.

If you're just starting out, you'll enjoy it.

Tags