NEW APOGEE X-HD OPTION CARD FIRMWARE
NEW APOGEE X-HD OPTION CARD FIRMWARE FEATURES
BETTER INTEGRATION WITH PRO TOOLS HD
FOR IMMEDIATE RELEASE
Santa Monica, CA, August 9th 2007 -Today, Apogee
Electronics Corporation released an update to
their X-HD option card to provide better
integration with Pro Tools HD.
The X-HD v.2 option allows for direct
connectivity between Pro Tools HD systems and
Apogee's AD-16X, DA-16X, and Rosetta 800 and 200
series converters, providing superior quality
conversion to Pro Tools HD users without the need
for an additional interface.
The X-HD v.2 release changes Apogee hardware
emulation in Pro Tools to better support I/O
setup and auto delay compensation without
compromising channel counts or converter
For more information, please see the Apogee website here:
Apogee Electronics: Downloads: X-HD Card
The Apogee Electronics Support Team
X-HD firmware v.2.0 adds the following features:
• All Apogee interfaces are now detected as 192 Digital interfaces (as opposed to 192 interfaces), to ensure phase coherency across all outputs when Pro Tools Delay Compensation is enabled.
• When an AD16X and DA16X are set to Advanced Routing and connected to the same Digidesign PCI card, it’s now possible to configure Pro Tools I/O inserts with the AD/DA’s analog and digital I/O. This is made possible by changes within the X-HD card that route the AD’s analog inputs and the DA’s analog outputs to the first 16 Pro Tools channels (A1-16) and the DA’s digital inputs and AD’s digital outputs to Pro Tools channels 17-32 (B1-16).
• Latency correction values are now entered in the I/O Setup window, for simpler and more effective compatibility with Pro Tools Delay Compensation.
• The X-HD User’s Guide has been re-written to improved clarity and included new functionality
For more information go to: http://www.apogeedigital.com/downloa...?show=xhd_card