Skip to main content

a problem may occur during when i install Focusrite scarlett driver but when i open fl studio 20. then one error may appear and i dont know why its appearing like :-
(not enough asio output channel available. at least 2 channels are needed)
i nstalled driver properly but the driver not showing Focusrite in window sounds like playback and recordings and i am using window 8.1 which is fully updated.
plzz help me.

Dushyant Saini

Topic Tags

Comments

pcrecord Sun, 06/21/2020 - 05:36

Make sure you Mixwizard (included in the drivers) detects the audio interface.. Mixwizard is there realtime mixer, in there you should be able to redirect the audio from an input to an output and hear yourself.
Once this works.. There is audio settings in fl studio. chose asio drivers and activate the input and outputs offered by the scarllet.
Then, it should be ok.. close and open the software ...