Skip to main content

TC Helicon Voice Live Rack - Anyone have experience with this product?

Iv'e been looking at this TC Helicon Voicelive Rack and was wondering if anyone has had any experience with it?
I know there was another thread where the TC Helicon Livewire 3 and Izotope Nectar 2 were discussed, but was hoping to get anyones' thoughts or feedback on this particular rack mount version of the Voicelive.

http://www.TC Helicon.com/en/products/voicelive-rack/

Comments

Sean G Tue, 08/11/2015 - 02:22
Thanks Chris, much appreciated.
I read your thread on Isotope Nectar 2 as I recently aquired this as well as Ozone 6 and Alloy 2, I'm looking into whether its worth picking up the Voicelive rack for the added vocal effects processing. It looks pretty impressive although I'm no fan of the touch screen technology used on the front panel.
I am pretty impressed with Nectar 2 s' capability although I'm still finding my way around it to a degree.

Tony Carpenter Tue, 08/11/2015 - 08:02
@Sean G i have a voice live 2 and a voice live touch. Hardware in these cases work much better than Nectar 2. I have Nectar 2, I do like it but I always feel the voice live touch ( same as the rack) gives a more hands on more live real sound quicker. The only challenge you may face is using it in route. I would suggest only using it as an aux route, not via usb. Only use it via usb if it's your only interface you have :).

Just my honest opinion.

Tony

Sean G Tue, 08/11/2015 - 08:20
Makzimia, post: 431515, member: 48344 wrote: @Sean G i have a voice live 2 and a voice live touch. Hardware in these cases work much better than Nectar 2. I have Nectar 2, I do like it but I always feel the voice live touch ( same as the rack) gives a more hands on more live real sound quicker. The only challenge you may face is using it in route. I would suggest only using it as an aux route, not via usb. Only use it via usb if it's your only interface you have :).

Just my honest opinion.

Tony
Thanks for the advice Tony, That was the plan to use it as an aux route. I have also made a few calls to dealers here in Sydney, Australia today to find out more about.
I was puzzled when I noticed it runs at 12 volt DC . I suppose the upside is it will help ease power consumption.

DonnyThompson Wed, 08/12/2015 - 04:56
I have a buddy who uses a Telicon VoiceLive for his live solo act; he likes and uses it a lot for his gigs.

The only thing that I've noticed about it - and this might have been only on an older model ( I don't recall the model number) and has perhaps been upgraded since - was that there was no discreet output for the direct vocal.
But, this model was being used by another friend of mine in his home studio, and it's been several years ago, so this might be a feature that has been included on models since.

Tony Carpenter Wed, 08/12/2015 - 06:12
The routing out of the outputs is handled by the settings, and from memory you can split various parts of the signal. Check later versions of the OS it runs, they added / changed features over time. My approach personally is to get a engineer version on a track (using the auto level comp etc it has. or none), if I want a mostly dry voice, then do the harmony/wet one to another. Either way, you end up with a really nice processed voice.

Sean G Fri, 09/04/2015 - 06:58
Well its taken 3 weeks and it finally arrived today....
I have to say in the short time that Iv'e played around with it this afternoon I am impressed with the vocal effects so far.
The vocal harmonies sound pretty good, theres a few hundred vocal presets as standard and 400 programable user presets.