Skip to main content

I know it's been a long wait for a picture of the new. . wait for it. TUBE EQ! So here it is. It is a Pultec EQP-1A style EQ, with high voltage tube makeup gain just like the original! It utilizes CineMag input and output transformers, a CineMag inductor, Tung Sol high-end tubes out of the box (12AX7 and 12AU7).

I'm amazed at how musical this thing sounds, it pulls detail/frequencies from a source signal so smoothly, it makes everything come alive. I've paired 2 of them for mastering and mixes sound like they're being transferred from digital to vinyl, but without losing detail. . unreal smooth. The frequency response is stellar 20hz-50khz.

If you compare it to the original we added a few frequency points. The 200, 400, 800 Hz are really cool low mid options that weren't available on the original. 3 and 4 Khz cut options were added too.

__________________

Bryce Young

A Fully Professional Mic Pre. At A Ridiculous Price

http://www.WarmAudio.com

 

Comments

audiokid Mon, 12/29/2014 - 17:48

Pretty nice looking. I just sold two Pulse Techniques Pultecs for $6000. They are beautiful but I didn't see the value in them at mixing stage, which is why I really bought them. They are incredible.
I would love to try this out from Warm Audio though. Especially now that I have an ear for what I consider the benchmark of pultec reissues.
It would be fun to see how this $699 clone comes close.

Nice one Warm Audio. (y)

kmetal Tue, 12/30/2014 - 00:30

I'm excited about this. OB eq is extremely underrated especially for tracking where it is most effective/practical Imo. And at that price point if it comes close to event the ballpark of a pultec, it's a fair price per channel, and realistic.

I would guess, without heaing it, that it would break up less flatteringly, have less noticable 'tube' effect on the sound, and probably a less robust low end. Things related to a less beastly power supply, and cheaper components. But I have a very limited understanding of the electronics aspect of it.

I would also guess, that it's probably workably close for most people who would want a pultec style OB, and would be tough to merit the significant price discrepancy. Nevermind the possibility of some basic upgrades that always get mentioned it seems, tubes, caps, and power supply, who knows. 500-1000 is an interesting price point. JDK, the api branch, has some interesting pieces in this price too. For mid level studios, like mine, where you need a fair amount of live inputs, I think three eqs of this nature that were say, decent/good would have a better impact on most average recordings, more than one unit that was say 10-15% more amazing. Again speculation on my part.

That said I think it's easy to hit the point of diminishing rturns on OB eqs and comps, especially if you don't track much, or its one or two ch at a time. Which really a channel strip, and a decent master bus processing set of OB is more than adaquete on paper at least.

anonymous Sun, 01/04/2015 - 02:53

I'm the dissenter on this one. I've worked with two different Warm models in the past, and I thought they both sounded "okay". Not bad, but not jaw-droppingly great, either.

FWIW, I think the same way about any Avalon gear I've ever worked with as well. ;)

Okay. I'm finished with my review(s) now.

As you were. :)

audiokid Sun, 01/04/2015 - 15:05

I can't imagine these being remotely close to what Pulse Technique makes right now. Those are so quiet, so smooth and unnoticed between hard bypass and in. The shaping you can do with these was amazing. When you move the dials, they are so smooth in how they shape your goal. Its hard to mess up. The tubes add an addicting silk charm. They are special but expensive. $3000 for one channel. How does Warm do it for a 1/4 of the price.

Being said, I sold them because I can do everything they did "for me" better through Samplitude. I am curious about these though. They sure "look" nice.

kmetal Sun, 01/04/2015 - 19:02

audiokid, post: 423195, member: 1 wrote: How does Warm do it for a 1/4 of the price.

Cheaper components, over seas labour, and since it's based on an established design, probably not a whole lot of RND, other than figuring out how to incorporate cheaper componets. That is not a cristisizm, it's actually what makes his thing interesting to me. A couple of cinemags, new caps, and if chips ( lol sorry evryone I talk whos techy always comments on power supplies, caps and chips.) could perhaps bring this thing to a new level.

anonymous Mon, 01/05/2015 - 03:45

kmetal, post: 423212, member: 37533 wrote: Cheaper components, over seas labour, and since it's based on an established design, probably not a whole lot of RND, other than figuring out how to incorporate cheaper componets. That is not a cristisizm, it's actually what makes his thing interesting to me. A couple of cinemags, new caps, and if chips ( lol sorry evryone I talk whos techy always comments on power supplies, caps and chips.) could perhaps bring this thing to a new level.

LOL... yeah, but then you're not really using an actual Warm EQP, are you? You're using the Warm Audio EQP-KM. The KM stands for "Kyle Modified". ;)

Who knows? You may end up becoming a studio standard name like Jensen or Lundahl.

"I'm using a Focusrite with Kyle preamps." ;)

audiokid Sat, 06/27/2015 - 10:56

Has anyone surfing by this thread actually experienced the vintage or the reissue from Pulse Technique to these yet? I wonder if Warm would send me one?

I wonder what the pots cost in this compared to what I had.
What makes me wonder, I had a pot go on a UA 1176LN and it cost $80 CDN to replace it (not counting labour).

TUBE EQ! So here it is. It is a Pultec EQP-1A style EQ, with high voltage tube makeup gain just like the original! It utilizes CineMag input and output transformers, a CineMag inductor, Tung Sol high-end tubes out of the box (12AX7 and 12AU7)

I have no idea about design costs, what it costs to build something or the difference between various parts.
There are 8 larger pots and switches , tube, tranny, the guts, labour, chassis, packaging, shipping and handling and room for dealer profit to boot! And this entire build is under $700.

But then there are companies like this, with pretty low pricing
http://classicapi.com/catalog/index.php?cPath=50_131

kmetal Sat, 06/27/2015 - 23:06

I have never laid hand on a pultec. I've built it up so much il probably be dissapointed. I would wager it's just like all the other gear. The warm will probably get you 90% of the sound. That last 10% is had in a 'real thing/boutique copy' and at about 3-400% more money. There's usually something that can't be made up for in the real thing, but that said, provided there decent, I'd probably be happier w 4 channels of warm, than one pultec, from a versatility standpoint. I'd rather be able to eq Kik snare and over heads, vs just one channel. And really to build one from scratch, isn't gonna be a whole lot cheaper than the warm, the question is can you make a significantly better one for the same price.