I honestly have one of the worst acoustic environments you could have in my room...10 guitars hanging on a single wall. There's a futon, curtains and such, but nothing that really reduces flutter and echo. Terribly for trying to record trumpet, loud guitar, really, anything.
Anyways, so I've got an empty closet in here. I've been contemplating a design based on the room within a room concept, on a small scale. VERY small scale lol. My final planned dimensions for the exterior (LxWxH) are 52"x53"x80". The walls will be 4 inchs thick, 1 inch MDF-2 inchs of board fiberglass insulation, and another 1 inch of MDF. I've been planning on putting in a window, but who knows. The door will be attached to only one of the sides, interior v. exterior.
I don't know how feasible this is, but I think it's an interesting plan, no? I can't think of any other way to decouple on the cheap, other than this. I hope that the compression of the insulation will be enough to make it seems stable inside.
Any thoughts? I'm not an acoustic engineer or anything, far from it really. Just tired of recording under a blanket.
Cheers!
Topic Tags
Comments
I've looked at bass traps...but most are out of my budget. I ac
I've looked at bass traps...but most are out of my budget. I actually found this site by looking at how to make bass traps.
http://www.instructables.com/id/Make-accoustic-panels-for-your-recording-studio-or/
Is this done correctly? I don't really understand how the trap works. Is it the fiberglass that attenuates?
The search function I used returned this link which seems to add
The search function I used returned this link which seems to address the issue the best out of the 280 it returned :)
[[url=http://[/URL]="http://recording.or…"]Yet another booth advice needed [/]="http://recording.or…"]Yet another booth advice needed [/]
Guitarman63mm wrote: I've looked at bass traps...but most are ou
Guitarman63mm wrote: I've looked at bass traps...but most are out of my budget. I actually found this site by looking at how to make bass traps.
http://www.instructables.com/id/Make-accoustic-panels-for-your-recording-studio-or/Is this done correctly? I don't really understand how the trap works. Is it the fiberglass that attenuates?
Yes, that article seems to be a good encapsulation of many DIY acoustic treatment articles using OC703 on a frame. It even addresses offsetting the panels from the wall.
This would be an excellent and affordable way to treat your main room, which may not apply entirely to your iso booth.
Note that you have to have some reasonable carpentry skills.
"but nothing that really reduces flutter and echo. " I would wo
"but nothing that really reduces flutter and echo. "
I would work on this.