An Electet Condenser mic is when a backplate and diaphram are charged by an electret material which is in the diaphram or on the backplate.

Verse

A True Condenser where the diaphram and the backplate are charged with a voltage from a curcuit built into the mic

The deffinition for electret is a material that permanently stores an electrostatic charge.

I decided I'm going to go the computer recording route from now on. The main problem is that i don't have a computer. So I'm going to get a job and make money to build my own.

We have this old Compaq pII that I'm going to basically gut and put all new parts in. I want to know what you think of the stuff I'm putting in and if you have any other suggestions or comments

i have a decent computer with a revolution 7.1 soundcard in it. i have a cheapy epm agt 200 transducer for my guitar. do i need a preamp for this setup to work?

Hi everyone,
I own a hollow electric Ibanez AS83 guitar. It's maple
front, back and sides. The shape is similar to the 335.
I think, to improve it by replacing the original pickups
to something better. I had in mind Gibson 57 Classic,
or may be Gibson P94s.
Did anyone had any experience with tis guitar ?
Thanks,
Costy.

have just dl the betabugs crayon filters plugin , how do I use this in Cubase sx3?

Simple instructions please peeps Im ultra new 2 this :D

Hey everybody, this is my first post but I read the forums all the time. Please let me know what you think of this recording:
http://www.myspace.com/fistrock
It's the first song (BHC Sample)-- should start playing automaticly.

Hi, I'm sure you get posts like this all the time, but i'm sure you understand that posts like this need to be specific, depending on the person/budget etc

I would very much like to get into recording, though i don't want to start off too flash or anything. I'm just looking to have the ability to produce a decent quality recording.

This is an open question about how to register details once you become a login member for this forum, which I've done.

Still getting my Pioneer RE-909 Reel to Reel up and running as pictured here:
http://tinyurl.com/l2lec
...in the photo it's the one on top that is. The one on the bottom is an older 707 that needs LOTS of work and I'll get to that one later on.

Hello,

Can some one give me good alternatives to GENELEC 8050APM
I don't know other good makes and models.

thanks a lot