Benchmark ADC1 USB Silver

The Benchmark ADC1 USB is a 2-channel 192-kHz 24-bit analog-to-digital audio converter

  1. Press
    The Benchmark ADC1 USB is a 2-channel 192-kHz 24-bit analog-to-digital audio converter with an unprecedented feature set. This converter was designed to consistently deliver reference quality conversion in 'real-world' conditions. It features Benchmark's jitter-immune UltraLock(tm) clock system and an extraordinary analog front-end.
    Jitter-immune UltraLock

    The UltraLock(tm) system delivers consistent, high-quality conversion even when slaved to a poor quality external clock. The performance of the ADC1 USB will not degrade when slaved to an external clock - a claim very few converters can make. Enjoy the convenience of a clock input that automatically recognizes AES/EBU, S/PDIF, Word Clock, or Super Clock sources - all with the unsurpassed jitter immunity of Benchmark's UltraLock(tm) clock-isolation system.

    Benchmark's Precision Analog Circuitry

    Benchmark has a long tradition of building ultra-high performance analog circuits that are designed for maximum transparency. The ADC1 USB extends this tradition by pushing performance to the limits of today's technology. The analog front-end delivers low-noise low-distortion high-bandwidth performance over a wide gain range (45dB). Precise gain and calibration controls allow for accurate channel matching. Capture exact imaging, difficult transients, and subtle details with stunning realism.

    Intelligent Meters

    The nine-segment dual-range, digital LED meters enable high-precision level monitoring. Meter response times are matched to the response of the human eye so that every peak is clearly visible. All metering is fully-digital and is not subject to calibration errors. A peak hold function allows an infinite hold to verify that an over has not occurred. Dual ranges allow signal presence monitoring, or precise headroom indication. The meters even use an upsampling technique to detect and display inter-sample peak overloads. This upsampled metering warns of potential overloads that may not be detected by conventional digital meters.
    Flexible Digital Outputs

    The ADC1 USB has a total of 5 digital outputs (1-XLR, 2-coax, 1-optical, and 1-USB). These can operate simultaneously at up to three independent sample rates. One of the coaxial outputs can be configured for 16-bit TPDF dithered output. This unique flexibility allows simultaneous recording to a CDR, while recording high-resolution to a digital recorder and a DAW. For example the CDR may operate at 44.1/16 while the DAW operates at 88.2/24 while the digital recorder operates at 192/24. Backup and/or reference recordings can be created with ease while high-resolution outputs are fed to primary recording devices. The optical output supports AES or ADAT formats at resolutions up to 192/24. In ADAT mode, high sample rates are supported using SMUX2 and SMUX4.

    Benchmark's AdvancedUSB

    Benchmark's AdvancedUSB solution provides a bit-transparent computer interface that is capable of streaming at rates up to 96 kHz/24-bit without installing any drivers. This reduces CPU loading, eliminates driver compatibility issues, and greatly improves the reliability of the data transfer. Benchmark's unique driver-less AdvancedUSB(tm) solution is compatible with Mac OSX and Windows 2000, XP, and Vista. Benchmark's UltraLock(tm) clock system insures the audio will never be contaminated with jitter-induced artifacts from a poor-quality computer-based clock. With the Benchmark ADC1, the performance of the USB interface matches the quality of the AES and ADAT interfaces. The convenience of a direct computer interface no longer comes with a performance penalty!

    Consistent Performance

    Often specifications only indicate how a product will perform under the most optimal conditions. The ADC1 USB is designed to deliver consistent performance - even in adverse conditions. The ADC1 USB is fully specified at all gain settings, all sample rates, through all digital outputs, and even when locked to a high-jitter clock signal. This performance insures reliable and predictable results in the 'real world'. A full list of specifications and performance charts can be found in the ADC1 USB manual (available on our website).
    Analog Audio Inputs
    Number of Inputs (balanced): 2
    Connector: Gold-Pin Neutrik female XLR
    >Impedance: 200 k ohms
    Sensitivity: -14dBu to +29 dBu (at 0 dBFS)

    Clock Reference Input
    Format : Auto-detect AES/EBU, Word Clock, and Super Clock (256x)
    Impedance : 75 ohms
    Sensitivity : 150 mV AES, 200 mV Word Clock, 750 mV Super Clock
    Transformer Coupled : Yes
    DC Blocking Capacitors : Yes
    Transient and Over-Voltage Protection : Yes
    Jitter Attenuation Method : Benchmark UltraLock

    Wordclock Reference Output
    Impedance :75 ohms
    Level: 5 Vpp, 2.5 Vpp into 75 ohms
    Transformer Coupled: No
    DC Blocking Capacitors: No
    Transient and Over-Voltage Protection: Yes

    Digital Audio Outputs
    Number of Digital Outputs: 1 XLR Main, 1 TOSLINK Main, 1 BNC Main, 1 BNC Aux, 1 USB
    Connectors: Gold-Pin Neutrik male XLR
    Number of Audio Channels: 2
    Main Output Word Length: 24 bits
    Main Output Sample Frequencies: 44.1, 48, 88.2, 176.4, or 192 kHz
    Aux Output Word Length : 16 or 24 bits
    Impedance: 110 ohms XLR, 75 ohms BNC
    Level: 4 Vpp into 100 ohms XLR, 1 Vpp into 75 ohms BNC
    Transformer Coupled: Yes
    DC Blocking Capacitors: Yes
    Transient and Over-Voltage Protection: Yes
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice