Drawmer D-Clock

The D-Clock is a dual input/twenty output word clock

  1. Press
    The D-Clock is a dual input/twenty output word clock distributor with a 16 character blue LCD display providing a reference measurement of the incoming sample rate. Both AES/EBU and BNC word clock inputs feature a zero latency loopthrough output with switchable high impedance to maintain the correct level of the digital signal for onward distribution. The D-Clock displays incoming sample frequencies up to 768 kHz to an accuracy of 2ppm (parts per million) with two further modes - sample frequency with ±ppm error and sample frequency with % pull up/down for video users.

    Sixteen BNC clock outputs are situated on the rear panel with a further four BNC clock outputs on the front panel for quick patching to other digital devices. The word clock outputs can be derived from either a word clock input or alternatively an AES/EBU audio signal from which clock information can be stripped. In the latter case, one of the many mic pre’s with internal A/D conversion but no word clock output can be utilised as the master clock source for the whole digital studio.


    Features

    • Inputs: BNC with zero latency loopthrough
    • AES with with zero latency loopthrough
    • Outputs: BNC loopthrough / AES loopthrough
    • 20 BNC clock outputs - 33½ impedance
    • 3 sample rate measurement LCD modes accurate to 2ppm
    • Universal voltage filtered mains power input
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice