2408

  1. Motu 2408 MKII issue

    He'll everybody just joined and have a Motu issue. Using Reaper,Win 7 homebuilt I7, 8 gigs ramm, motu 2408 with updated 424 card, using analog inputs for guitars and bass and Presonus d8 for real drums. Everything was fine until...today. This morning started guitar track had to go out, came...
  2. sturoc

    MOTU 2408 Mk3 + card ?

    Have a chance to grab one for real cheap including the PCI-424 card. But is it for me ? For recording I use alot of keyboards, my bass, and occasional elect guitar tracking. Along with a small amount of outboard reverb / delay units. Cubase 5 PC based system. So will I be able to plug right into...
  3. MOTU 2408/Cubase/Headphones problem

    I've been slow coming to the age of digital recording, so please assume minimum knowledge on my part, despite that I've copiously read all my manuals and watched YouTube videos 'til my brain is mush. I've been able to record tracks, but I cannot figure out how to get sound to my headphones...
  4. Help with MOTU 2408 and ADAT lightpipe

    I have a MOTU 2408 Mark 1 and 2-Adat blackface and 2-Adat XT-20s. I am trying to get the Adats into my computer but I can't seem to find a way to get Cubase or Reaper to see the optical inputs. I also don't have a manual for the 2408 and have not had any success locating one via google, yahoo...
  5. TommyOnFire

    Alesis HD24 --> MOTU 2408 --> DAW

    Hi everyone, I am recording live gigs onto an HD24. When I monitor the tracks from the HD24 on a console, sounds great. After running through the MOTU 2408 to my DAW to edit in the PC and play them back through the console, they lose punch, clarity and sounds much muddier. Could this be an...
  6. hyaena

    MotU 2408 sync problems

    Hi folks, here´s a question regarding sync, My actual setup: PC with Gigabyte EP45-UD3R, WinXp Pro Sp2 (installed older version because I argued driver probs) MotU PCI324 card and 2x 2408MKI connected. Actual drivers installed, device detected, no probs. The first 2408 syncs my...
  7. ECB

    2408 digital inputs

    HELP!! I just hooked up 3 adats with their optical outs into the A,B,&C banks of the 2408. I am using Samplitude and tried recording the 24 tracks but all i get is noise. The recorded audio looks as though they are the digital waveform pulses. Is this a direct transfer from the adats?? They...
  8. motu 2408 sync problems

    Hi Guys, I'm using 3 x MoTU 2408 with cubase vst5 on a mac g4. I'm having a problem trtansferring a track from my Fostex DAT via the optical connection through my TC finalizer then through sp/dif into the motus and then into cubase as a stereo master file, which I can cut and export to burn. I'm...
  9. MOTU 2408 problem

    -------------------------------------------------------------------------------- I'm hoping that someone can give me the easy answer here. I'm pretty sure that there is one but I dont know what it is. I shut down my whole studio last night because there was a storm on the way. I alm ost never...
  10. Help ! All Unbalanced Outputs Yamaha RM 2408

    I just recently bought an old Yamaha RM 2408 board that I just realized has all unbalanced outputs. I want to go to a patchbay from the board but I'm not sure if I should get tranformers for every output to switch to balanced or if it matters . I'm eventually going into a digi 002...
  11. MOTU 2408

    I was just wondering if this would be a good choice and if i would be able to use it with my yamaha MG16/4 mixer / how i would go about hooking it into the mixer so that each mixer input goes out to seperate inputs on the MOTU.
  12. MOTU 896 HD or 2408 mk III

    Of these two interfaces, can anyone explain what the specific advantages or disadvantages of one over the other is? What's the difference about having a PCI card interface rather than something that isn't PCI based like the 896? I need some pointers here in this area, if someone could try and...
  13. MOTU 2408 MK1?

    There is this guy offering a MOTU 2408. I think it is the first model that came out (should I say MK1?) Need some advice on this card. Is there any problem I should have in mind other than its specifications? The board is not for me but for a guy I know that is mounting his home studio...
  14. schizojames

    MADI System Interface for DMX-R100 and MOTU 2408MK3's

    We finally recieved the computer for the new studio, and smiled as we thought, "A couple more connections and we will be up and running." Suffice it to say, things just got way more complicated. Setup and Questions: We are running 24 channels from the studio into channels 1-24 on a Sony...
  15. MOTU 2408 MK3 OR 24I/O ???

    just curious what would be better to buy?, i'm gonna be doing live audio recording with my apple g5 and im gonna need at least 24 channels to start, eventually going to 48 channels , also i'll need to sync audio to live video shoots. just curious if anyone could give me any insight on which unit...
  16. MOTU 2408MKIII 24bit or 16bit at playback?

    Hey everybody, I was just wondering if thw MOTU2408MKIII can play back at 24bit resolution or is it locked at 16bit.
  17. MOTU 2408mk 3 core system ..plz help!

    I know this may sound silly to some of you but I just want to know this before I go out and buy it. Can I send audio from my sequencer(sx3) to the motu 2408mk 3 unit and route it back to audio inputs in cubase so I can record stuff straight onto audio tracks with just the 2408 unit and...
  18. MOTU 2408 MKII playback problems - HELP?

    Hi everyone, I have just replaced my PC with a new 3GHz P4 loaded up. I removed my 324 card and re installed it in the new PC. The system worked great in my old PC. In the new one however, when I record anything via the analog ins, the playback quality is very distorted. Almost like you're...
  19. MOTU 2408 mkII vs. 828 mkI Help

    I just got a g5 and so I need to upgrade my 2408 mkII system with a 424 pci card. My question is for about a little more than the cards price I could get the first generation 828 firewire interface and be able to sell my 2408, so would that be a good idea? Is the quality of the 2408 mkII better...
  20. MOTU 2408 MKII converters

    Hi Guys, What do you think of the MOTU 2408 MKII converters ? I want to use them to A/D convert from Fostex G16 1/2" tape to my PC. Thanks !
Top