compressor

FATSO And Its Compressors!

Submitted by epicenter800 on Tue, 02/19/2002 - 06:44

I currently use an RNC and Crane Song Hedd for tracking my keyboards and Vocals into my DAW. I like the tube and tape emulations on the HEDD for both tracking and mixing. I was wondering if the compressors on the FATSO were pretty useable for tracking and the 2-bus. I'm not too sure is getting a FATSO would be redundant since I have way to warm and fatten things up with the Hedd.

Preamp and Compressor shootout?

Submitted by coldsnow on Sat, 02/09/2002 - 12:50

I'm trying to do my own preamp and compressor shoot out and I'd like to split the signal after the mic and power supply (tube mic with own power) into two or three different preamps. Then do the same after a single preamp with two or three different compressors. This way I am using the same takes and what not to judge the comparison. Will I run into phasing problems or will this work?

Connecting a dbx 576 pream compressor to a Tascam -428

Submitted by anonymous on Tue, 01/15/2002 - 09:46

I am recording from an AKG 1000s microphone into a dbx preamp. Also using a Kurzwel K2500.

What setting are needed on the various inputs and outputs on the back of the dbx preamp. there is achoice of dbV and dBu (-10 and =4)

in particular,

1. What is needed on the input from the Kurzweil?