I have a mac g4 digi001 and DP3 I use micro xpress
as an interface. Dp3 does not see the 001 hardware
I've talked to everyone and tried much I'm sure it is something small I'm doing. someone please give me some insight. also will I have these problems when ever I get Nuendo?

I happened to noitce in the middle of a session that my (phantom powered) B.L.U.E. mouse mic was not working (barely passing signal) when plugged into my VINTECH 1272 preamp. Oddly enough, it seems to work fine on other preamps, (TubeTech, Daking, etc). And also, oddly, other phantom mics like a TLM 103 continue to work fine on the Vintech.

This is my first use of the Forum so bear with me.

Has anyone run into this one?

Hi I am having problems hooking up a S/PDIF cable to my hammerfall 9636 card and my Tascam da-30 dat machine. All I hear is white noise coming out of the RMEcard. I am using a 75 ohm (I think) monster video cable. I also tried a regular audio rca cable and was getting a cliping sound over and over again. I also wasnt to thrilled in my hunt to find this little piece of text.

Hi -

Hi I just purchased this unit used and it doesn't seem to be working properly. The person I bought it from said they would take it back so thats not the problem. The problem is that I can't get a digital signal into or out of the adc. The ADAT optical seems to be broken. I should note that at no time has there ever been light coming out of the toslink cable.

hey all, not sure if this is the right room for this but,

If anybody out there could help me with my problems, I Shure would be thankful. First, here is a list of the components in my system:

I am using a Midiman delta 1010 as part of my studio setup with
neuendo and windows 98, i had been using it with the 'ASIO multimedia
driver' under the device setup menu in neuendo, but the computer ran slowly
and stopped responding frequently, so i switched to the' M-audio delta ASIO