A-Designs EM-PEQ

Discussion in '500 series' started by audiokid, Oct 22, 2011.

  1. audiokid

    audiokid Chris Staff

    Mar 20, 2000
    BC, Canada
    Home Page:
    The EM-PEQ The classic all-tube Pultec EQP-1A goes down on the record books as one of the most venerated equalizers of all time, cherished by recording and mastering engineers for its almost mythical ability to improve the sound of just about anything running through it. Finally, after much research and development, A-Designs Audio announces that it has managed to capture much of the essence of the famed EQ in a new product ? and one that fits in a compact 500 Series module frame size, no less!

    The A-Designs "EM Series" is a twist on the P-1. Each color has its own sound. This was accomplished by using different custom wound output and input transformers.
    Dubbed the EM-PEQ, A-Designs Audio was able to "shrink" this highly sought after filter design into the now red-hot 500 Series format without compromise to either build quality or sonics. The EQ section design and control layout of the classic EQP-1A has been meticulously maintained, as well as its wonderfully smooth musicality.

    Makeup amplification is achieved through the use of the same discrete Class AB amplifier found in A-Designs Audio's popular solid-state Pacifica mic pre, putting a slightly unique twist on the classic design of yesteryear.

    Additional features include a nickel core output transformer, gold Grayhill rotary switches, Wima caps, and a true hard bypass. Instead of using common off-the-shelf chokes, A-Designs uses a custom-wound tapped inductor wound to the original values. Fully balanced, noise-free operation with modern impedance specs make for dummy- proof operation and fast studio integration.

    The new A-Designs EM-PEQ is an approved API "VPR Alliance" product and may also be used in BAE racks and A-Designs Audio's R52 manufactured by Avedis Audio Electronics.

    h=3A-Designs EM-PEQ's featureshTABLE
    TD="width: 100%"
    *-20dB Pad
    *48v Phantom
    *Cast aluminum knob
    *Thumb Screws (for easy install and un-install)
    *Solid construction
    *Custom Wound Transformers (input and output)
    *Original Design (no CLONES)
    *Red LED indicator for Phantom power

    Attached Files:

Share This Page