a problem with battery 3 in logic pro

Discussion in 'Mixing & Song Critique' started by djfearny, Jan 5, 2007.

  1. djfearny

    djfearny Guest

    just got a little problem with battery 3 in Logic Pro which is really driving me mad.

    I have set up battery as a multi instrument with battery options set to have 10 Stereo and 10 Mono outputs going to logic.

    I have made 9 more stereo Aux channels accepting inputs 3/4 to 19/20 from battery which all work spot on and of course 1 more which is the standard stereo 1/2 which battery is running on for direct ouput.

    I have then made anoter 10 Mono Aux channels for accepting outputs 21 through to 30 of battery and this is where I come into a little problem.

    The aux channels are all sitting there ready but when I get to assisning them I cannot select past battery channel 24 on the aux channels so I have the next 6 to assign but in the list it only gives options for upto channel 24 of battery outs.

    I am really confussed by this and am wondering if there is a simple way of being able to select these last 6 battery out for the aux channels.

    hope this makes sense and somebody can shed some light .

    thanks in advance guys
  2. djfearny

    djfearny Guest

    i'm still very confussed to why the above is doing what it is.
    If anybody has any tips or help on this subject I would be very gratefull indeed


  3. gdoubleyou

    gdoubleyou Well-Known Member

    Mar 19, 2003
    Kirkland WA
    Home Page:
    to find the logic community go here.



Share This Page