calling all cubase heads!

Discussion in 'Mixing & Song Critique' started by jace_one, Oct 9, 2002.

  1. jace_one

    jace_one Guest

    posted earlier.....must try to solve the problem.

    i cant get cubase to recognise the reason devices so that i can select them in the midi output window on each midi channel.

    i've tried alot of settings and configurations, but nothing seems to work. am i overlooking something.

    the thing is, i get reason to play, but no midi communication between the two. the audio comes through the reason mixer channels and through the master (but i cant record it). so its like rewire is working for the sake of audio signal, but cant figure out the midi thing.

    sorry for the double post (doesnt seem there are too many people in here)

    thanks for replies
  2. Opus2000

    Opus2000 Well-Known Member

    Apr 7, 2001
    What version of Cubase and Reason? If Cubase VST than you might need to go to the MME settings and activate them...not sure though as I never record the MIDI in Cubase...I always do it directly in Reason itself.
    Nuendo always seems to show the MIDI outputs though!
  3. jace_one

    jace_one Guest

    i'm using reason v.1 and cubase vst32 v.5.

    i read in something that cubase is suppose to automatically recognize the reason devices and all you have to do is activate them (when reason is opened after cubase).

    i checked the mme settings too and everything was kosher, at least as far as i know how they are suppose to be settup.

    i have the us428 control in the output. and a,b,c,d in the input activated. i dont know if reason devices should show up there or not, i dont remember checking.

    i have the midi thru activated, the thru off channel is off.

    one thing, my rewire channels will only go up to 16. even if i have 32 or 42 channels available. could it be something in the audio setup? i dunno.

    thanks for the help
  4. Opus2000

    Opus2000 Well-Known Member

    Apr 7, 2001
    I would try uninstalling Reason and reinstalling it. Also update to the latest version of Cubase 5.
  5. GentleG

    GentleG Guest


    you want to rewire.

    I use Cubase VST 5.1
    (it worked from version 5.04r)

    * first install Cubase
    * update Cubase to at least 5.04r
    * install Reason
    * Open Cubase
    * Activate Rewire (at least channel 1 and 2, these correspond to the audio channels on the back of the Reason hardware interface)
    * Open Reason

    Now all your Reason audio (going through Reason's hardware interface channels 1 and 2) goes to Cubase.

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice