Center channel mix ?

Discussion in 'Microphones (live or studio)' started by realdynamix, Aug 14, 2001.

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

  1. realdynamix

    realdynamix Well-Known Member

    Feb 23, 2001
    Is there any advantage to mix, and or process the center channel information on a seperate bus?
  2. audiowkstation

    audiowkstation Active Member

    Jun 29, 2001
    Hi Rick!...Been missing you on ICQ....have some session work going on...

    Yes...I feel that to have the center on a separate bus makes sense. I use completly different compression and eq for the center...I keep my low frequency sharply cut at 70 hz and down and limit the top to about 11K. I process it altogether differently and watch the phase relationship between the center, the front corners and the sides (7.1).

    Depending on the program I will allow some pretty stiff headroom on the center channel...and plenty of noise reduction...but not gated.

    We can talk more about specifics as time allows.
  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice