Configuration and Routing Techniques?

Discussion in 'Recording' started by BigTrey, Jun 21, 2005.

Tags:
  1. BigTrey

    BigTrey Active Member

    Location:
    Grandville, Michigan
    Home Page:
    Hey Ro'ers:

    Does anyone out there have any ideas on how I can route an Mbox to a digital cd recorder and the recorder to digital output on the monitors? This is what's in my DAW:

    Gateway M305 Notebook, 2.40 Ghz, 512Mb Ram
    Lacie 160GB External Firewire Drive @ 7200 rpm
    Maxtor 80GB External Harddrive @ 7200 rpm
    Kawai FS690 Keyboard (for midi input)
    Yamaha PRS-172 Keyboard
    Yamaha MG12/4 Analog Mixer
    MBox
    Roland DS-50A, 24-bit Digital Monitors
    KLH Systems (Motorola DNA chip) CD Recorder

    Anyhelp would be greatly appreciated.
     
  2. BigTrey

    BigTrey Active Member

    Location:
    Grandville, Michigan
    Home Page:
    My recorder has an optical input and so do the monitors.
     
  3. hociman

    hociman Active Member

    Location:
    NYC
    Home Page:
    Converters

    Use S/PDIF-->Optical converters.
     

Share This Page