Cool Edit Pro 2.0/MobilePre USB problem!

Discussion in 'Microphones (live or studio)' started by rkidfan001, Jan 4, 2005.

  1. rkidfan001

    rkidfan001 Guest

    Hey everyone, I just stumbled upon this place while I was looking for answers that I unfortunately haven't found yet. Here's my problem: I have a MobilePre USB preamp and I am trying to record into Cool Edit Pro 2.0, but when I record in, it only gives me the left channel. I've tried fooling around with the settings for both the hardware and the software, but I haven't been able to fix anything. Can anybody please help? Thanks a lot
  2. Hideo

    Hideo Guest

    I am having this same problem, I am using adobe adution and the moblepre and its only comming out of the left channel.
  3. Big_D

    Big_D Well-Known Member

    Aug 21, 2004
    Quakertown PA
    Welcome to RO, thanks for posting.

    This may sound like a silly question but do you have the pan control set properly? I'm not familar with the Mobile Pre but I'll see what I can dig up.
  4. CombatWombat

    CombatWombat Active Member

    Dec 17, 2004
    Portland, Or
    Hey guys. The MobilePre has 2 mono channels. That is why it is only recording to the left channel. You'll see that if you plug your mic/instrument into channel 2, it will record everything on the right channel. As far as I am aware, you just have to record everythying that way, then copy/paste to the other channel.
  5. rkidfan001

    rkidfan001 Guest

    Hey guys, thanks for the replies. I called tech support for M-Audio and the guy there helped me. CW, you're right about the mono channels. What I had to do was for the track I was recording, select right channel only and then it records a mono track that gives sound to both channels. Hideo, I don't know how audition works, but it's probably pretty similar. If you have any questions, I'll try and help. Thanks everyone
  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

Share This Page