Cubase Audio Mixdown

Discussion in 'Mixing & Song Critique' started by guitar10, Aug 19, 2006.

  1. guitar10

    guitar10 Guest

    hi i recorded a song and added cuabse Eq's and effects to it, when i did a audio mixdown to a mp3. file it lost all of this infomation ! is this ment to happen? and if so is there anyway of making it not do it

  2. Robak

    Robak Active Member

    Mar 10, 2006
    Are you using sx3 or sx1?
    Did you select the proper BUS (in sx3) for mixdown?
    In sx1 you can choose to do mixdown with or without effects.
  3. guitar10

    guitar10 Guest

  4. Check the following things

    did you bypass the effects or are they muted? (sometimes if you solo something not connected to those fx this occurs)

    are the fx routed to your stereo output bus - look at the fx channel strip and make sure it is routed to your main stereo outs and not some other virutal outs or disconnected.

    if you still have no joy log into and post on the forum, you will probably get numerous answers within a few hours
  5. guitar10

    guitar10 Guest

    okay thanks everyone !!! how do you select the bus?
  6. the easiest way is to either do it on the channel strip, or right mouse click on the effect, or use the device panel setup.
  7. guitar10

    guitar10 Guest

    thanks !!
  8. omegaarts

    omegaarts Member

    May 12, 2003
    If You'll go to the Cubase fourm and enter your Dongle number you'll find all the help you'll ever need for SX.

    By the way your answers are in the Cubase manual.

Share This Page