Digital Performer DIGI 002 - need help?

Discussion in 'Consoles / Control Surfaces' started by chrispybac, Jun 11, 2004.

  1. chrispybac

    chrispybac Guest

    I'm running DP 4 on a G5 through an DIGI002 and having trouble. I got the audio working fine with the DIGI Core driver, but am having trouble with MIDI. I'm using a Triton as a MIDI controller and tone generator and have it plugged into analog 7 and 8 on the 002. I will soon be adding a dedicated gigastudio setup via light pipe. The MIDI is getting into the computer fine (via MTP A/V)- I see MIDI info, and it plays back fine... at least by sight. Now why can't I hear it? I sort of "grew up" running DP 3 under DAE through DIGI 888's, while monitoring through an O2/R, and never had any problems like this. I just bought this current rig and I'm sort of lost...
    Lots of other questions, but I'll start with this one... :D
  2. BladeSG

    BladeSG Guest

    I'm not familiar with DP 4, but I think you'll need to route inputs 7-8 of the 002 straight to the outputs, as if it were a line mixer to monitor the Triton.

Share This Page