Gina 24 to powered monitors

Discussion in 'Monitoring' started by SUPERMAN, Feb 8, 2005.


    SUPERMAN Guest

    I will soon be picking up a pair of powered monitors (KRK RP8) and was wondering exactly how to hook my Gina 24 breakout box to these monitors. I'm thinking I need TRS cables from outputs 1and 2 to each monitor. Is this correct? Will I have adequate volume levels with just the outputs of the gina and the 140 watt amps in the monitors? Will I need another amplifier or mixer?

    Also wanted to know what anyones thoughts were on these monitors.
    Thanks in advance for any help.
  2. moonz

    moonz Guest

    I assume the Gina has balanced outs (probably TRS...but possibly XLR) run the Gina outs 1 and 2 to the left and right KRK balanced ins (probably XLR...but possibly TRS)...

    Once you've got cables with the right connectors at either end you just hook em pre-amplification of the output from the Gina would be necessary.

    Those KRKs should make some very nice studio monitors.


Share This Page