L2 Output

Discussion in 'Mastering' started by vagelis, Oct 30, 2002.

  1. vagelis

    vagelis Guest

    Well I go with the L2 into the Genelecs and the loudness blow me away. I have to turn the output down to listen to the music but I can't record over the digital outpu of course cause the signal is too low.
    What shall I do?
    :(
     
  2. Michael Fossenkemper

    Michael Fossenkemper Distinguished past mastering moderator Well-Known Member

    Joined:
    Sep 12, 2002
    Location:
    NYC New York
    Home Page:
    you have your system setup wrong. you should be using some kind of preamp to your monitors. I'm not sure what you have and how it's setup but the way you described, isn't the best way.
     
  3. vagelis

    vagelis Guest

    Ok DAT = L2 = Genelecs

    or Desk = L2 = Genelecs

    I can turn the monitors down to -6 dbs but it's still loud.
    The Finalizer's got for example an analog output but the L-2

    How would you do it?
    Thanks alot - Vagelis
     
  4. Michael Fossenkemper

    Michael Fossenkemper Distinguished past mastering moderator Well-Known Member

    Joined:
    Sep 12, 2002
    Location:
    NYC New York
    Home Page:
    The correct setup would be.

    Desk > L2 > preamp to control the volume to the speakers. So the L2 would feed both your preamp and you 2track master. ideally you would be able to switch between the output of your L2 and 2 track in your preamp. If your using a conventional console, it has a preamp built into it. If your using just the output of your workstation, you will need to purchase a preamp that has several inputs.
     
Similar Threads
  1. vagelis
    Replies:
    1
    Views:
    1,140
  2. vagelis
    Replies:
    14
    Views:
    2,168
  3. Wilber
    Replies:
    8
    Views:
    1,862
  4. logamos2001
    Replies:
    34
    Views:
    4,938
  5. Dizzi45Z
    Replies:
    14
    Views:
    5,156
Loading...

Share This Page