M-Audio Delta 1010 Problem...anyone one help?

Discussion in 'Converters / Interfaces' started by Impaled, Feb 8, 2005.

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

  1. Impaled

    Impaled Guest

    Hey all, I'm new here......can anyone suggest a fix to this problem? When I plug in my delta 1010 all I get is feedback and the power light doesn't come on. This has happened several times in the past but disconnecting the cable and trying again would work. Now all I get is feedback on all the input channels. I was thinking maybe I have a bad cable, hopefully its not ^#$%ed. The sound card is still working great, this happens when I connect the brek out box.

    any ideas??
  2. diziet

    diziet Guest

    Do you have a mic connected at all? This could be a feedback loop.

    Also, MAudio recommend that you only connect the breakout box when it's power and the computer are off.

    Maybe you could post some more details about what you have connected to the breakout box...

  3. MikeMohan

    MikeMohan Guest

    Try a standard printer cable that you know works - I'm pretty sure that's all that connects the breakout to the PCI.

    My breakout died on me once - no power light, no response, nothing. I sent it back through the store I bought it from and within a few weeks they sent me a whole new system. Slow, but good service.

    You might wanna try different drivers as a last shot, but i doubt that's the problem.


Share This Page