Mackie monitors or Sennheiser headphones?

Discussion in 'Monitoring' started by Wyatt W, Mar 8, 2013.

  1. Wyatt W

    Wyatt W Active Member

    Joined:
    Feb 13, 2013
    Location:
    Charleston, SC
    I'm trying to do the best I can to monitor and mix my own stuff with a really low budget. I can't afford more than $200 right now, and I'm working in an untreated room. Through craigslist, I have the choice of a pair of Mackie MR5s or a pair of Sennheiser 598 headphones. They're the same price. Any recommendations?


    By the way, this is for the short term, while I work to save up for room treatment and some Adam A7s. In the meantime, I need decent mixes.
     
  2. DonnyThompson

    DonnyThompson Well-Known Member

    Joined:
    Nov 25, 2012
    Location:
    Akron/Cleveland, OH
    Home Page:
    From Sound On Sound, reviewing the MR5 and the MR8:

    (excerpt)

    All the above being said, you need to make sure that you are monitoring in a room without significant acoustical issues. As stated many times before in various threads all over this forum, the room you are mixing in is just as important as the speakers you are mixing through.

    If your room has issues with standing waves, flutter echo, ringing, etc., then you could be using the best monitors money can buy and you're still going to have problems.

    source: Mackie MR5 & MR8 Mk2

    fwiw
    -d.
     
  3. Audiofreek

    Audiofreek Active Member

    Joined:
    Oct 13, 2012
    Location:
    Prince George,BC,Canada
    If you mix through phones,your mixes will not transfer well to speakers.If you are using reverbs the mixes will be ambience heavy(as reverb gets enhanced by the early reflections in a room),and the bass will out of wack.You will have to play your tracks on as many systems outside of your studio as you can,and go back and tweek the mixes until they sound good on all of the systems.
    If you are mixing in a small, untreated room,too many untreated early relections will cause you comb filtering at the mix position,and your bass will be out of wack,so you will have to test your mixes on many system either way.The Mackies would require a sub for accurate Low end end,as they are only a 5 inch driver,so even in a treated room,you will have to check you mixes on other systems.Even the Adam A7 would benefit from a sub.
     
  4. Blue Bear Sound

    Blue Bear Sound Active Member

    Joined:
    Feb 15, 2001
    Location:
    Ottawa, Ontario, Canada
    Home Page:
    Headphone Mixing Article >>>> Whad'ya Mean I Can't Mix With Headphones????
     
  5. Kurt Foster

    Kurt Foster Distinguished Member

    Joined:
    Jul 2, 2002
    Location:
    77 Sunset Lane.
    Great Article

    bruce,

    that's a great article. you should post it as an individual post ... maybe it will be turned into a sticky. thumb
     
  6. Audiofreek

    Audiofreek Active Member

    Joined:
    Oct 13, 2012
    Location:
    Prince George,BC,Canada
    One has to wonder though,with alot of music being listened to smokeon buds,perhaps we should be checking our mixes on them as well.
     
  7. Kurt Foster

    Kurt Foster Distinguished Member

    Joined:
    Jul 2, 2002
    Location:
    77 Sunset Lane.

    there's lots of things people are doing. but doesn't mean we should be all going to hell with them (rap/ dubstep / noise / and electronic music in general in mind). stupidity has to be stopped somewhere. here is as good a place as any other.

    JEBUZ! duh

    the blurb Bruce just put up ... read the part where it says people all hear differently and headphones (ear buds) exacerbate the problems.
     
  8. kmetal

    kmetal Kyle P. Gushue Well-Known Member

    Joined:
    Jul 21, 2009
    Location:
    Boston, Massachusetts
    Home Page:
    the alesis m1 mk2 active are very nice in the price range, i thoroughly enjoyed them for a few weeks when my cousin let me borrow them.
     
  9. Blue Bear Sound

    Blue Bear Sound Active Member

    Joined:
    Feb 15, 2001
    Location:
    Ottawa, Ontario, Canada
    Home Page:
    Thanks Kurt!

    The only problem with posting it separately is that if I make changes/updates to the article (as I occasionally do) they won't get propagated to the thread....
     
Similar Threads
  1. reddb
    Replies:
    12
    Views:
    1,533
  2. eddiesound
    Replies:
    3
    Views:
    1,235
  3. baze7
    Replies:
    14
    Views:
    4,677
  4. ferchis
    Replies:
    6
    Views:
    2,790
  5. Anonymous
    Replies:
    6
    Views:
    833
Loading...

Share This Page