Mastering Question

Discussion in 'Mastering' started by Void, Apr 29, 2002.

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

  1. Void

    Void Guest

    Im using pro-tools 001. I have this song all done and it sounds great now i need to export it as a wave format, and i would like to export all in one track. Is that possible? What other steps could i take? I NEED HELP URGENT!!!
  2. Ronny Morris

    Ronny Morris Guest

    If you are talking multi tracks that are all done, you need to mix the tracks down to stereo L and R and than save that stereo track as a 16 bit wav file for burning to cd or playback on PC/Mac. I'm not familiar with 001, so look for a feature called Mixdown or Mix Paste to 2 track. To archive the multi tracks, look for Save The Session. Saving the session will save each track as a wav. The session file will re-assemble the tracks to their proper time line, if you need to recall at a later date for a re-mix.

    You would probably get more response from a recording group, instead on a mastering forum. There is bound to be a PT 001 newsgroup and probably several of them. They would be your best bet as 001 user's can give you the step by step specifics.
  3. brad

    brad Guest

  4. OTRjkl

    OTRjkl Guest

    Brad -
    Would you still do this even if the original files were 16 bit? You wouldn't stand to gain anything by going from 16 to 24 bit would you?

    (I'm not second guessing you, I'm just trying to learn.)
  5. brad

    brad Guest

  6. errollem

    errollem Guest

    Hi Brad,

    I'm considering to buy a alesis masterlink.

    In our studio we work with logic audio running on digidesigns TDM hardware.

    I'm not a big fan of bouncing so I was wondering
    how good and stable the masterlink is.

    Also in our mastering room I'm thinking of putting a masterlink.


    best wishes

    Errol Lem
  7. brad

    brad Guest

  8. homerg

    homerg Active Member

    Jan 18, 2002
    Hi Void,
    I have the Digi 001 and all you have to do is go to File, Bounce to Disk, select Stereo Interleaved and the Bit rate you want. If you're going to master from this file then bounce it 24bits. If you're just going to burn a CD of it then bounce it 16 bits. If you're going to mater it with another software program like T-Racks or Soundforge, then don't dither until you do.
  9. OTRjkl

    OTRjkl Guest

    How does that work? It you're working with 16 bit files & you mix (bounce, render, whatever) it down to digital at 24 bits, where do the extra bits come from? Is this dependent upon some conversion taking place (A/D, D/A) or using some outboard gear & re-entering the DAW at 24 bit or the internal processing resolution of someplug-ins or what?

    I totally understand if you're working with 24 bit files to begin with, but 16.....?

    Sorry for sounding so ignorant. :confused:
  10. brad

    brad Guest

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice