Maybe I dont know what I'm doing but...

Discussion in 'Microphones (live or studio)' started by giussaniboy, Jul 20, 2004.

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

  1. giussaniboy

    giussaniboy Guest

    I have a pair of nice expensive tannoy monitors that sound muddy and muffled. The tweeters work but they dont sound crisp or clear. I use a pair of sony 7506's and there is a world of difference in quality and clarity between these phones and my speakers. I have a cheap fostex board (454) and am running thru a carver pm-300 amp from the monitor outs of the board. The speaker cables are good quality and the cables are the banana type. I have already checked that the polarity matches. The speakers can be bi-amped but I don't think they have to be. There is a conductor that comes wth the speakers to connect the two sets of terminals on the back. Any ideas are greatly appreciated.
  2. djui5

    djui5 Guest

    do cd's sound muffled or just your mixes?
  3. Massive Mastering

    Massive Mastering Well-Known Member

    Jul 18, 2004
    Chicago area, IL, USA
    Home Page:
    You have jumpers going to both sets of connectors, yah?
  4. giussaniboy

    giussaniboy Guest

    yah the jumpers reach both connectors. anything that goes thru that board seems like it seriously lacks high end. also my mixes come out way more deep bass and high highs than i expected. maybe it has to do with the amp not pushing them hard enough. they are tannoy pbm 8 II's the amp is 150w per channel. any ideas?
  5. BladeSG

    BladeSG Guest

    Has your room had any acoustic treatment?
  6. Kurt Foster

    Kurt Foster Distinguished Member

    Jul 2, 2002
    77 Sunset Lane.
    I think this sounds like a crossover problem ... or like you may be plugging your monitor chain into an RIAA phono input. Could this be the problem?
  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

Share This Page