McCurdy Console

Discussion in 'Consoles / Control Surfaces' started by Tungstengruvsten, Feb 22, 2002.

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

  1. Tungstengruvsten

    Tungstengruvsten Active Member

    Sep 10, 2001
    Guelph, Ontario
    I have a chance to purchase a fully maintained and working 1970's 12 channel McCurdy broadcast console-for very cheap. I know this isn't a Harrison or Neve desk but it was a $30k desk when it came out-will I benefit from any character this desk could have?
    I would mainly use it for tracking through if it imparted a unique character to the sound. I have seen pic's of the mic and line preamps and they are built like tanks-they have transformers and discrete circuitry by the looks of it....I've also found retrofit mic preamps for it on the web-anyone ever seen one in use or used one? Know a damn thing about them??

    Eric Warren
  2. anonymous

    anonymous Guests

    Feb 10, 2001
    Tumble from a newspaper.........................................................a leaf......................................
  3. Dan-O

    Dan-O Guest

    Things that blow? Things that are blown? Things blown by the wind?
  4. anonymous

    anonymous Guests

    Feb 10, 2001
    No it's desolate out here in "answer-land", we are waiting for someone to turn up..... everybody is inside, what are you doing out here!

  5. Kev

    Kev Well-Known Member

    Nov 13, 2001
    I'm here!!

    but I don't understand the question. Broadcast consoles can have strange routing for use as a recording desk.

    I don't know that particular console so it is hard to say. Direct me to a picture or circuit diagram .... something!

    Retrifit things can be cool but first ask yourself why am I doing this and if it fills the need then do it.

    Last thing.... the EQ section matters, an inbuilt patchbay wiil save you much time, and replacement parts and switches could be very dificult.

    that's all I can give for now?
  6. radioprof

    radioprof Member

    Aug 17, 2001
    McCurdy still is in business here in Canada but they don't make consoles any more.
    I've used and maintained their consoles from the early tube models through the transistor and solid state editions.
    Yes, they are solidly built to stand up to the mistreatment of ham fisted dj's.
    They sound pretty good but be prepared to re-cap.
    They usually mix down to mono or two stereo channels, after all, they were built for broadcast.
    There were some more sophisticated models for production use.
    It's not crap by any means.
  7. Tungstengruvsten

    Tungstengruvsten Active Member

    Sep 10, 2001
    Guelph, Ontario
    The console can be had for less than a Marshall microphone-with rack mounted preamps i was hoping i'd either be able to isolate those if they were any good or use the whole desk for something. It's coming from the CBC and has been maintained and was removed in working condition-even stored in a climate controlled environment. Maybe it won't be worth the couple hundred bucks but I'm gonna go take a look at it...heck if I could pull a good handful of parts/meters/knobs it might be worth the investment...maybe even just as a conversation piece...

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice