need help monitoring through simple mixer!

Discussion in 'Monitoring' started by KingRobotuk, Sep 7, 2009.

  1. KingRobotuk

    KingRobotuk Guest

    Help me please!

    My setup is vocal/ guitar into mixer (Yamaha MG 10/2) into computer (Audiophile 2496), then back into mixer then to monitors.

    I know this is possible as I had this setup working before - but I can't for the life of me figure out how to do this now - I keep getting the signal from the computer looping back into the computer - whereas I need this signal to be separate

    - does anyone have this mixer I know its pretty popular? or perhaps someone who has a better understanding of recording could help me sort this mess out?

    here's a link to a picture of the mixer:

    http://upload.wikimedia.org/wikipedi...maha_mg102.jpg

    Please someone help me!

    thanks

    Dave
     
  2. Codemonkey

    Codemonkey Well-Known Member

    Joined:
    Dec 11, 2007
    Location:
    Scotland, UK
    FYI your image link doesn't work.

    You need to check that your mixer is not routing the computer signal to the outputs, which it probably is.

    Mic -> channel 1 -> aux 1 AND main fader up
    Guitar -> channel 2 -> aux 1 AND main fader up
    Computer -> channel 3 -> EITHER but not both
    Whatever one you send the computer to, record from the other.
     

Share This Page