1. Dear Guest, if you haven't already... enter to WIN Samplitude Pro X5!
    Dismiss Notice

New singer trying to understand the process

Discussion in 'Mixing & Song Critique' started by Louise, Jun 23, 2018.

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

  1. Louise

    Louise Active Member

    Jun 17, 2018
    Hey everyone. I am new to this forum. I have just been in a pro recording studio for the second time and my tracks have come back obviously compressed and sounding dull sound wise and fairly quiet... Do you know what I have to be saying back to the studio to get a louder, crisper sound? I know I am capable of a good, strong, crystal clear vocal so I am wondering why I sound crushed and dull. What have they done?
    audiokid likes this.
  2. Kurt Foster

    Kurt Foster Well-Known Member

    Jul 2, 2002
    77 Sunset Lane.
    it could be a number of things happening. it's hard to make a call with out knowing a lot of things like mic and pre amp choice, room quality, what recorder is used, processing while tracking and mixing ... and a lot more. i would start by voicing your concerns to the recordist on your project.
    audiokid and kmetal like this.
  3. kmetal

    kmetal Kyle P. Gushue Well-Known Member

    Jul 21, 2009
    Boston, Massachusetts
    Home Page:
  4. pcrecord

    pcrecord Quality recording seeker ! Well-Known Member

    Feb 21, 2013
    Quebec, Canada
    Home Page:
    I must caution, every recordist present himself has PRO STUDIO or PRO AUDIO ENGINEER, but not all of them are. Even between truely pro ones, they are bound to be better in some genres or have their own sound which may not fit your expectations.

    You first need to figure out what the Studio gave you.
    What is it :
    1. a premix which is just exporting the song to help you decide if your tracks are good enough and if you need to go back and record some part of it. If so it will need to be mixed
    2. a mix made to be sent to a mastering engineer who will deal with levels and sonic properties better than the mixing engineer. If so, mastering is needed
    3. the final product which may seem badly done to you.
    4. a professionnally done mix but your listening device is very cheap...
    Second, talk to the engineer ! If he is any good, he/she will explain to you what he has given you and what is the next steps you should do.
    If it's the option 3, ask for the track files and make them mixed by someone else..

    If you want our help to assess what you have, please post a sample here. (it needs to be mp3 at max 320kb)
    We will gladly help you !
    dvdhawk, audiokid and kmetal like this.
  5. audiokid

    audiokid Chris Staff

    Mar 20, 2000
    BC, Canada
    Home Page:
    Welcome to our community!
    without knowing what exactly was used for equipment and what the recordist/ mixer did to process your tracks, the obvious answer to dull usually means poor quality in something and crushing usually means bad judgment in compression/ limiting.

    Post an example and we will nail most of it down for you.
  6. paulears

    paulears Well-Known Member

    Feb 7, 2014
    Lowestoft - UK
    Home Page:
    So many so called pro-studios, simply apply their band treatment to a solo singer. Especially if the singer provides them with a pre-mixed track. Our band gets this every single time we do a PA supplied gig, because the house people think compression is applied the same on EVERY genre of music. It doesn't!

    You also probably failed to be the client, and were passive. When they were mixing, did you say - I don't like that sound, it is dull and lifeless? Did you instruct them, or fall for the "I'm a professional engineer, you are just a singer" patter?
  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice