Noise in the monitors

Discussion in 'Monitoring' started by Gius, Dec 3, 2007.

  1. Gius

    Gius Guest

    Hello guys,
    I have a horrible problem. My home-studio devices consist in an Imac G5, an M-Audio 410 Firewire soundcard and two KRK Rokit 6 Powered monitors. From some mounths the monitors produce a really nasty noise, actually not really a noise but something like a square wave with a constant frequency. At the beginning this sound used to start as soon as the monitor of the computer was going in standby, but now it starts already when I switch on the computer. Working for hours with this saw in the ears is terrible. What do you think about this? does it depends on the computer on the sound card or on the monitors?
    Notice that I tried to substitute the 1/4" balanced connectors, but without luck. Also notice that switching on the audio monitors, and not plugging the connectors to the computer, doesn't produce this irritating sound.
    I really would appreciate your help.
    Thank you in advance,
  2. hummel

    hummel Guest

    You should only post in one forum. Triple posting might lead to all of your posts being deleted.
  3. bent

    bent No Bad Vibes! Well-Known Member

    Oct 26, 2007
    Cocoa, FL
    Home Page:
    You have three copied posts - please delete the other two.
  4. BRH

    BRH Active Member

    Aug 16, 2006
    LA, CA
    I would call that a firewire interface, not a sound card. Have you tried trashing pref and/or reloading drivers? Maybe try a really expensive Monster firewire cable. Some people using the M-Box USB interface have complained about this type of noise, referring to it as 'The USB Whine.'
    Some have fixed it with a better cable or making sure the cable is not near any other power sources.
  5. MrJesus

    MrJesus Active Member

    Dec 2, 2007
    When I've gotten this sort of issue through a USB connection before it has been due to shoddy powering of the computer which the USB is hooked up to. Mainly laptop power supplies, but sometimes desktops. If the comp is a laptop, try running it off the battery and see if that works.
  6. audiokid

    audiokid Chris Staff

    Mar 20, 2000
    BC, Canada
    Home Page:
    NOTE Admin Topic Edit:
    Brought over from one of the other triple posts ( now all deleted)

    Ardroth wrote:

  7. Gius

    Gius Guest

    I didn't know multiple posting is not allowed.
  8. hueseph

    hueseph Well-Known Member

    Oct 31, 2005
    Vancouver, BC, Canada
    Would you describe this as a whine? If so, the issue is well documented concerning whining firewire interfaces.

    From Harmony Central:

    "At this point I remembered Paul White’s comments about processor cycling with respect to the Inspire 1394. Per his recommendation I had downloaded the CHUD utility from the Apple web site, which adds a processor option to the System Preferences menu under "Hardware." I opened it up, unchecked "Allow Nap," and…and…and…

    The whine disappeared. Totally. 100% non-existent."

    "To Anderton, I have a dual G5 and experienced the same whine with my FireBox, and like you, came across the CHUD tools which solved the problem. But, I also discovered an Applescript which can be downloaded and dropped into your Startup Items folder which will automatically uncheck the "Allow Nap" option to prevent the second CPU from idling:"

    Hope that helps.
  9. Gius

    Gius Guest

    Thanks to all of you.
    I think it was an electric problem. I was plugging the feeders of the computer and of the monitors all together on the same wall outlet. Maybe the single wires were touching each other.
    Now I have moved the two feeders of the monitor on another outlet. No disturbances anymore.
    Thank you again

Share This Page