NS10s and the Samson Servo 200?

Discussion in 'Monitoring' started by Souljazz, Jul 18, 2011.

  1. Souljazz

    Souljazz Member

    Jul 18, 2011
    Hi all,

    I hope you are all well.

    Just thought I would see if anybody could tell me if it would be ok to use a Samson Servo 200 amp with a pair of Yamaha NS10s?

    I know everyone recommends - Bryston, Hafler & Crown but I have a Samson Servo 200 and was wondering if the spec is ok and won't cause any problems.

    Servo 200 = 2 x 66 Watts at 8Ω, 2 x 100 Watts at 4Ω.

    Here is a link to a site that you can download the manual -
    Samson Audio - Servo 200

    Thanks for your time and hope to hear from you.

    Kind Regards,

Share This Page