Output/Input levels from mixer to audio IF

Discussion in 'Consoles / Control Surfaces' started by hoghansson, Feb 3, 2005.

  1. hoghansson

    hoghansson Guest


    I'm planning to record drums using my PC, Edirol FA-101 audio IF and mixer. Recording will be done using 8 input channels.

    Edirol has following inputs:

    - 2 x CH with mic preamps
    - 2 x CH Line In (adjustable from -10dBu to +4 dBu)
    - 4 x Line In (+4 dBu)

    My plan is to connect 2 mics directly to Edirol using its mic preamps. Rest 6 mics is planned to be connected to Yamaha analog mixer using its mic preamps. What is the best way to route those 6 mics from Yamaha to Edirol?

    All mixer channels have insert (SEND/RETURN) but output level is only 0 dBu (no problem with Edirols adjustable line ins). Is there a point to route signal from mixer inserts to Edirol Line Ins? All advises are very welcome.
  2. hoghansson

    hoghansson Guest

    Found answers in the other forum...

    I found similar discussion thread in the Pro Audio Gear forum, sorry for spamming ;)

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

Share This Page