Perform Realtime Effects With Delta 1010?

Discussion in 'Converters / Interfaces' started by funkbomb, Aug 20, 2004.

  1. funkbomb

    funkbomb Guest

    How would I go about using a Delta 1010, which has 8 1/4" ins and outs each, for realtime effects use? For instance, take a guitar through Input 1 and have a distorted flange guitar on Output 1 in realtime?

  2. lofi

    lofi Guest

    do it like this:

    put guitar into di input of your preamp of choice.
    connect your preamp to any input. )1 to 8.
    use software like ART Teknika Console Sound Moduler Studio or Xlutop Chainer to route effects or amp simulation an then output it to outputs 3 and 4 (if stereo needed)
    route them to (outputs 3 and 4) to inputs of your choice.
    open your recording application
    it is advisable to set the effect aplication to realtime performance and set latency (buffers) to minimum (you need strong machine for that mind you)
    press record and start recording/playing in realtime.

    that is it :wink:

    good luck and peace

Share This Page