Preamp to Interface

Discussion in 'Converters / Interfaces' started by microphonen00b, Aug 13, 2011.

  1. microphonen00b

    microphonen00b Active Member

    May 16, 2011
    Hey forum!
    So I just scored a Tascam FW-1804, AND a Behringer MIC2200 preamp, all for $200. I think I got a pretty good deal.
    Anyway, I was wondering exactly how I go about connecting my preamp to my interface. The Tascam only has 4 mic inputs, and the Behringer is supposed to add another two, but I don't see how that is done...the back of it only has two line-ins, two line-outs, two mic inputs, and two mic outputs. The only ways I can think of don't make sense...and other than those, I don't really see and outputs.
    Anyway, any help is much much appreciated :)

  2. Boswell

    Boswell Moderator Distinguished Member

    Apr 19, 2006
    Home Page:
    Yes, you did. The only better deal I could think of would have been to get the FW-1804 on its own for $200.

    The MIC2200 has jack and XLR outputs wired in parallel. Use a pair of TRS jack cables to connect the jack outputs of the MIC2200 to two of the line input jacks of the FW-1804.
  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

Share This Page