question about m powered pro tools 7

Discussion in 'Mixing & Song Critique' started by Charmfist, Mar 22, 2006.

  1. Charmfist

    Charmfist Guest

    i know that you have to use m powered pro tools with m audio interfaces and vice versa for pro le and digidesign interfaces but can you open m powered sessions on a le system or HD system if you wanted to do some more tracking or mixing in another studio. I know you can do this with the original le systems... going between tdm, hd, and le setups.... i hope this is the same for m powered to?
  2. TVPostSound

    TVPostSound Member

    Feb 15, 2006
    Yes, use the "save as" instead of "save" then pick your poison.
  3. dawtx

    dawtx Guest

    I have both M-Powered and LE (on separate machines) and regularly swap sessions between the two. I don't believe you even have to 'Save As' a different file / version type.

    Pro Tools M-Powered will recognize the LE file; you will be prompted with the typical message acknowleding that the session was last accessed using a different hardware interface (i.e. 002, M-Box, etc). . . once you acknowledge the message the session should open good as gold!

Share This Page