Recording direct through Mackie Onyx 400f

Discussion in 'Microphones (live or studio)' started by Carlito, Apr 8, 2007.

  • AT5047

    The New AT5047 Premier Studio Microphone Purity Transformed

  1. Carlito

    Carlito Guest

    Hi guys. I'm trying to recreate as faithfully as possible the sound of a real miked amp. I'm recording my guitar (Epiphone Black Beauty) direct through the instrument inputs of my Mackie Onyx 400f, and using Guitar Rig 2 as an emulator. Of course, the tone isn't the same as recording a real amp, but it sounds too "direct". I was hoping that with the instrument inputs on the Mackie, it would sound almost as good as the real thing.
    Is there any kind of direct box or external "booster box" that could give me that "almost like the real thing" sound? I live in an appartment so I can't crank up an amp. I'd like to record my stuff direct if possible.

  2. moonbaby

    moonbaby Mmmmmm Well-Known Member

    Feb 23, 2005
    As with any type of recording gear, they take some fiddling with to get what you're after, but they have their place. And there's no latency!
  3. Link555

    Link555 Well-Known Member

    Mar 31, 2007
    North Vancouver
    Several pedals offer simulated amp output for guitar tone for DI applications.

    Korg makes some nice emulator, Line6 POD, Glasstone the 'Tin Can' etc...

    Basically the Speaker is like a filter, typically when a plug a Guitar straight into a distortion unit straight into a mixer you get a NIN like nasal tone. The speaker actually filters and rolls off a lot of the annoying upper ranges and some of the lower content. You could experiment within the software equalizer to do the same things as the pedal mentioned above. Its not easy though, it will take a bit of time, so once you got an eq to sound good save it for next time. To get you started check out these frequency plots.

    Hopefully that will get you going

Share This Page