Thermionic Culture Phoenix Master LE Red Face

Discussion in 'Dual Compressors' started by audiokid, Oct 25, 2011.

Tags:
  1. audiokid

    audiokid Chris Well-Known Member

    Location:
    BC, Canada
    Home Page:
    ATTACH1309.vBATTACH

    The new Phoenix Mastering Limited Edition Anniversary Model Compressor with Mullard valves. The unit will have a red faceplate and a combination of switched and stepped controls as well as an internal side chain filter. Units are currently in production and the run is limited to 99 units.
    h=3Thermionic Culture Phoenix Master LE Red Face's featureshTABLE
    TR
    TD="width: 100%"
    LIST
    * All valve design for greater presence and naturality.
    * Completely free from solid state additives.
    * Transparent compression.
    * Punchy when pushed.
    * Drive it hard for compression effects and distortion.
    * Absolutely flat frequency response over entire audio range and beyond.
    * Minimal phase shift giving a crisp and warm sound.
    * Stepped Input & Output controls
    * 6 position switched attack control
    * 7 position switched release control
    * 11 position switched threshold control
    * Side Chain Filter - 75Hz & 150Hz plus permutations.
    LIST
    h=3Thermionic Culture Phoenix Master LE Red Face's specificationsh
    LIST
    *BMax output level (MOL): +19dB into 600 ohms, + 24dB into 10K ohmsB
    *BMax Gain: 30dBB
    *BTotal Harmonic Distortion: Better than 0.06% @ 100Hz & 1kHzB
    *BÂ Noise, IEC weighted: better than 100dB below MOLB
    *BInput Impedance: 15k ohmsB
    *BFrequency response: B
    LIST
    TD
    TR
    TABLE
     

    Attached Files:

Share This Page