Trident 80B

Discussion in 'Consoles / Control Surfaces' started by Sebastien73, Oct 10, 2007.

  1. Sebastien73

    Sebastien73 Guest

    Hi my name is Sebastien, I'm an happy Trident 80B owner and i have a
    Ok I used to record with my trident and send my stuff in Protools..I mix in ProTools (cause I haven't total recall) and I send my playback again in the Trident. Should I use the stereo out Bus from the trident to get the all summ in Pro tools ?? or there is a better way through the trident to do this ??
    Thank you very much, friendly Sebastien
  2. Link555

    Link555 Well-Known Member

    Mar 31, 2007
    North Vancouver
    Big debate there, but I personally like the sound on an analog sum. 80B should be great for that.
  3. AudioGaff

    AudioGaff Well-Known Member

    Feb 23, 2001
    Silicon Valley
    Greetings and welcome to RO. The Trident 80B has a great reputation. Now here is where the tough love begins...

    Do what YOU think sounds best and/or what is needed to be done to get the results you are after. ONLY YOU can make these decisions. Don't be swayed by by others peoples opinion on how they do things or think you should do things. Try out your options and come to your own conclusions. That is what real engineers do.

    You do know what exact results you are after right? No point asking or going any furher until you have that part understood and resolved.
  4. Sebastien73

    Sebastien73 Guest

    Thanks for the post, I tried some other things... use the
    stereo bus send L/R and it also good works. The trident
    have an amazing sound and I'm happy about it :)
    Thanks for the post

Share This Page