Two card woes (not whoas)

Discussion in 'Recording' started by haggislostinspice, Feb 8, 2006.

  1. Aside from the pun, I'll get to the point. I had a successful (2 years plus) install of two Echo Darla cards on a P4 2.4c Asus P4p800 machine, giving me 16 outs to a little Allen and Heath GS1. I recently had a static charge which shut down the whole thing (not even a POST beep). After sending it off to a tech, everything was restored. Now, while Sonar sees both cards and gives me options for 16 outputs, I only get audio from one card.

    To be specific, even when I switch in Sonar to an out on the second card (let's say B 1&2), the audio somehow still comes out on first card (A 1&2) then goes to the mixer. I've confirmed this in the Echo console.

    How to fix this? Anybody have a guess? Thanks in advance for any help.
     
  2. TeddyG

    TeddyG Well-Known Member

    Joined:
    Jan 20, 2005
    1. When you turn off the machine, switch the cards(Shouldn't have to "do" anything else, just switch the cards, physically) and fire-up again, what happens?

    2. A little late, but, for the future(?) do you have a good UPS?


    TG
     
Similar Threads
  1. Kurt Foster
    Replies:
    18
    Views:
    4,872
  2. audiowkstation
    Replies:
    0
    Views:
    517
  3. eonblue
    Replies:
    6
    Views:
    1,109
  4. johntpt25
    Replies:
    1
    Views:
    1,036
  5. Rimshot
    Replies:
    7
    Views:
    2,140
Loading...

Share This Page