Very annoying feedback problem...

Discussion in 'Mixing' started by TyrantT316, Jun 12, 2005.

  1. TyrantT316

    TyrantT316 Active Member

    Joined:
    Apr 25, 2005
    I have an EMU 0404 card and am running my Roland Super JV1080 into the input...but I get this annoying feedback sound:

    SPL 2384

    I don't have this problem when I use a mic for the input at all...I don't have this problem when I input my roland jv sound module into an amp either...

    my brother is having the same problem with his Ensoniq ASR sampler/module...it is fine directly into an amp...but when into HIS computer, we get a feedback noise...a little different than my jv1080, but it is annoying...now we bought a cheap radio shack 4 track mixer, but we still get the feedback...the mic input is fine for him though...just like it is for me and my computer...

    I am wondering what this can come from? we have bought new wires and no luck...could there be other interference? is it normally a problem taking a module directly into a computer input?

    need help bad...

    thanks

    one thing I should ad, I have never had this problem before until now. Not with my Sound Blaster Audigy 2 nor my EMU 0404.
     

Share This Page